Ban Soon Cheong Pte Ltd


TEL: (65) 6790 9777
FAX: (65) 6790 9555

Benjamin Kuah

Jasmine Kuah

Kuah Beng Hui
CA (Singapore)

Alicia Kuah
B.Acc (Hons)

Adrian Ngoo
B.Mech.Eng (Hons 1)

Joe Lim


Locate Us

EDM Graphite - Grade G8

Electrical Discharge Machining Graphite Grade G8
G8 is a high strength fine grain isotropic EDM graphite. It is a mid range electrode which can be employed in both the roughing and finishing EDM process.

  • High metal removal rates
  •   High strength, low wear mid range EDM electrodes
  • Plastic moulds
  • Diecast moulds
EDM Graphite Grades are designed to span the range of application conditions from high metal removal rates to fine detail finishing.

  • Density - 1.83 g / cm3
  • Porosity (Open) - 10 %
  • Grain Size - 10 µm
  • Pore Size - 1.5 µm
  • Permeability (air at 20°C) - 4 x 10-2cm2 / sec
  • Hardness Rockwell B - 95 (HR 5 / 100)
  • Bending strength - 60 N / mm2
  • Young´s modulus - 11.5 kN / mm2
  • Electrical resistance - 13 µΩm
  • Thermal conductivity - 100 Wm-1 k-1
  • Thermal expansion (20-200°C) - 4.0 x 10-6 / K
  • Ash value - 0.2 max.%
We provide fabrication services to your specifications.





Disclaimer: Specifications and descriptions of the articles may change without notice. Teck Leong Industries Pte Ltd, Ban Soon Cheong Pte Ltd, Radiation Control (Asia Pacific) Pte Ltd, Eurometalli (Far East) Pte Ltd and Advance Storage Pte Ltd (known as “Our Group of Companies”) whether jointly or severally is/are not responsible for the accuracy, completeness or usefulness of information contained herein and shall not be liable for any damage, loss, injury or inconvenience arising from or in connection with the contents of this publication. All information presented in this publication is only strictly for reference purposes. Each and every member of Our Group of Companies disclaims all liability for the information presented nor is such information a warranty or representation by Our Group of Companies or any member thereof.